Bar Clamps Build Process
15/5/2021
The last job to be done on the sliding jaw frames is a little bit of filing. As the sliding jaws run along the threaded rod, the rear corner of the jaw bounces in and out of the thread. This isn't actually a problem, but the movement can be made smoother with a bit of filing.
I used a half-round file and cut a small groove in the rear of the jaw. This makes the jaws move much more smoothly.
Page Navigation:
First (#1) | Previous (#19) | Next (#21) | Last (#32) |
This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.