Finger Plate Clamping Tool

This is a finger plate clamping tool I made as a present for my father. The design was taken from a Clickspring video and I stuck to the (metric) drawings he provided. The only modification I made was to cut a 20 mm blind hole in one corner and to make a little "MJB" logo in brass: this was made using "press n peel" PCB film, ferric chloride for etching and some shellac bar to fill in the etched pattern.

I also made a simple presentation box out of laser cut acrylic: this is shown in the photo above.

This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.