Gear Calculator / Generator

I wrote this calculator after getting frustrated with the number of calculators on the web that focus on antiquated diametral pitch based gears rather than modern module gears. To use the calculator, enter the module and number of teeth and the rest of the table should automatically update. The image below the table gives an indication of what the gear might look like. If you put out-of-range values into any of the fields, it'll probably look wrong!

To use a gear in your chosen CAD system, you can download a DXF (or SVG). Note that the DXF approximates the involute gear form with a polyline - if you think you can help me get this to use a spline instead, please do get in touch. Most of the parameters are shown in the image on the left; you can click (or middle-click) on the image to see a bigger (and more readable) version of it.

Module \(m\):
Teeth \(z\):
Pressure Angle \(\alpha\) (°):
Profile Shift Coefficient (–0.9 to 0.9):
Include a central bore:
Bore Diameter
 (mm)
:
 mm
Include a keyway:
Keyway Size
 (mm)
:
 mm
Tooth Depth \(h\)
 (mm)
:
 mm
Addendum \(h_a\)
 (mm)
:
 mm
Dedendum \(h_f\)
 (mm)
:
 mm
Tooth Pitch \(p\)
 (mm)
:
 mm
Tooth Thickness \(s_0\)
 (mm)
:
 mm
Pitch Circle Diameter \(d\)
 (mm)
:
 mm
Circular Pitch \(CP\)
 (mm)
:
 mm
Root Diameter \(d_f\)
 (mm)
:
 mm
Tooth Thickness at Tip
 (mm)
:
 mm
Tooth Thickness at
Base
 (mm)
:
 mm
Outside (Tip) Diameter \(d_a\)
 (mm)
:
 mm
Base Diameter
 (mm)
:
 mm
Tooth Angular Pitch
 (°)
:
 °
Tip & Root Clearance \(c\)
 (mm)
:
 mm
Show Root Circle(s):
Show Pitch Circle(s):
Show Outer Circle(s):
Show Base Circle(s):
Primary Gear DXF:
Primary Gear SVG:
Show Meshing Gear:
Meshing Gear Teeth \(z\):
Centre Distance
 (mm)
:
 mm
Ratio:

This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.