Chunky Planter Build Process

Page 14

28/10/2021

The next job was to sort out the cut-outs into which the cross-pieces (which will support the mesh) will sit. The first job was to mark them all out; a total of 12 notches need cutting.

For the six that sit against a slot, the best way I could think of to remove the waste was simply to chop it out with a chisel:

For the ones that sit against the rebate, I could wobble the bulk of the waste out:

I could then tidy up with the chisel:

It's not pretty, but it was quick and it should work:

If only I could cut dovetails that fit that well!


Page Navigation:

First (#1)Previous (#13)Next (#15)Last (#17)


This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.