Portable Workbench Build Process

12/3/2021

Next up was the half-tube. I mounted this in the milling vice:

and milled a slot in the middle. That took a bit longer than cutting it with an angle grinder, but it's much neater!

Next I mounted it on a single parallel with the parallel going through the new slot, slid the parallel back out and drilled a hole for the magnet:

Here are all the lock mechanism parts together:

Page Navigation:

This website is free, but costs me money to run. If you'd like to support this site, please consider making a small donation or sending me a message to let me know what you liked or found useful.